I-JSY-MK-135 DC yokutshaja imfumba yemodyuli yokulinganisa amandla ombane

Inkcazelo emfutshane:

1. Dibana nemigangatho yomlinganiselo kwimfumba etshajayo yokuchonga inkcazo jjg1148-2018 kunye ne-gb_t_17215.321-2008.
2. Iprotocol ye-MODBUS-RTU.
3. Ukulinganisa i-45 ~ 65hz i-voltage ye-AC, okwangoku, amandla, amandla ombane, i-frequency kunye nezinye iiparamitha zombane.
4. Ukulinganisa i-voltage ye-DC, yangoku, amandla, iyure ye-watt kunye nezinye iinkcukacha.
5. Unxibelelwano lonxibelelwano lwe-UART.
6. Ibakala lokuchaneka lingcono kunomgangatho kazwelonke we-0.5s.
7. Iyakwazi ukutshintshwa kwaye ilungiswe ngokweemfuno zabathengi.


Iinkcukacha zeMveliso

Iithegi zeMveliso

IParameter yobuGcisa

1. Igalelo le-AC lesigaba esinye
1) Uluhlu lwamandla ombane:0~100v, 220V, njl.
2) Uluhlu lwangoku:0 ~ 16a manganese ubhedu isampuli ngqo okanye mutual inductance 20a, 50a, 100A, njl;Imodeli ye-transformer yangaphandle yangoku inokukhethwa.
3) Ireyithwe rhoqo:45-65hz.
4) Ukwenziwa komqondiso:i-chip ekhethekileyo yokulinganisa iyamkelwa, kwaye i-24 bit AD yamkelwe.
5) Umthamo wokugcwala:1.2 amaxesha uluhlu oluzinzileyo;I-instantaneous (<20ms) yangoku ngamaxesha angama-5, i-voltage ngamaxesha angama-1.5, kwaye uluhlu alonakaliswa.
6) Ukuphazamiseka kwegalelo:ishaneli yombane > 1k Ω / v, itshaneli yangoku ≤ 100m Ω.

2. Unxibelelwano lonxibelelwano
1) Uhlobo lwesinxibelelanisi:bonelela nge-UART ujongano lonxibelelwano.
2) Iprothokholi yonxibelelwano:Iprotocol ye-MODBUS-RTU.
3) Ubume bedatha:isoftware inokuseta "n, 8,1", "E, 8,1", "O, 8,1", "n, 8,2".
4) Izinga lonxibelelwano:izinga le-baud lingamiselwa kwi-1200, 2400, 4800, 9600bps;Izinga le-baud ye-interface yonxibelelwano yi-4800bps ngokungagqibekanga, kwaye ifomathi "n, 8,1".

3. Idatha yemveliso yovavanyo
I-Voltage, yangoku, amandla, amandla, i-frequency, amandla ombane kunye nezinye iiparamitha zombane.

4. Ukuchaneka komlinganiselo
Umbane, okwangoku kunye namandla:≤ 1.0%;Inqanaba le-kwh elisebenzayo loku-1

5. Unikezelo lwamandla
Xa amandla e-dc + 5v enikezelwa, i-voltage ephezulu ayiyi kudlula + 5.5v;Ukusetyenziswa kwamandla okuqhelekileyo: ≤ 20mA.

6. Indawo yokusebenza
1) Ubushushu bokusebenza:-20~+70 ℃;Ubushushu bokugcina: -40~+85 ℃.
2) Ukufuma okuhambelanayo:5 ~ 95%, akukho condensation (ku-40 ℃).
3) Ukuphakama:0 ~ 3000 yeemitha.
4) Okusingqongileyo:indawo engenalo ugqabhuko-dubulo, irhasi edlayo kunye nothuli oluqhubayo, kwaye ngaphandle kokungcangcazela okubalulekileyo, ukungcangcazela kunye neempembelelo.

7. Ukuhamba kobushushu:≤100ppm/℃

8. Indlela yokufakela:Ufakelo oluzinzisiweyo

9. Ubungakanani bemodyuli:amashumi amathathu anesihlanu × amashumi amabini ananye × 7mm; isithuba sePin 2.54mm


  • Ngaphambili:
  • Okulandelayo: